How To Make Kitchen Cabinet Doors

How To Make Kitchen Cabinet Doors. According to glass insert manufacturer bendheim, refacing your cabinets costs 80% less than totally replacing them. Cut the rails & stiles.

BacktoBack Door Pulls Moving Decorative Hardware Beyond from blog.topknobs.com

I started by cutting my 3/4″ plywood to the desired size (door opening plus 1/2″ inch, since i’m using 1/2″ overlay hinges, and the trim i added in the next step adds another 1/2″ inch to the width and height). Put the other rail in place (without glue!), clamp and measure from corner to corner, both ways. To figure the length of the rails, measure the total width of two stiles placed side by side.

Mark the back of each board so your dado lines up when you assemble your doors.

Cut cabinet door frame pieces Update your crappy kitchen cabinets by giving them a face lift. Use a level to verify that the marks on adjacent doors form a horizontal line before drilling the holes and installing the handles.

Plus, it’s a project you can do yourself over a weekend without losing the use of your kitchen (see our diy instructions below).

I’m still working on the drawer front and the upper doors, but let me show you how i made these doors. When satisfied with the coarse sanding, move to a finer grit and sand the entire cabinet door again. These are doors with a “frame” made most of the time from hardwood and a “panel” made of anything from solid wood to plywood to mdf.

Step by step process on how to build new hardwood panel doors for your kitchen cabinets.

Make sure your 1x3s are actually 2 ½″ wide. I started by cutting my 3/4″ plywood to the desired size (door opening plus 1/2″ inch, since i’m using 1/2″ overlay hinges, and the trim i added in the next step adds another 1/2″ inch to the width and height). While there are many options for door making, the standard is “frame and panel” doors.

To figure the length of the rails, measure the total width of two stiles placed side by side.

For this particular tutorial, take the total width the door needs to be and subtract 5″. Make your ideas come to life by using sketches and diagrams. Install a coarse grit sanding pad onto your random orbital sander and sand the entire cabinet door, paying special attention to the tongue and groove joints.

You’ll also need at least two extra “test”.

Put the other rail in place (without glue!), clamp and measure from corner to corner, both ways. According to glass insert manufacturer bendheim, refacing your cabinets costs 80% less than totally replacing them. I’ve got a detailed explanation of how to determine your door size in this post.

Leave a Comment